MULTICOLOR SPECIALTIES INC -- MULTISPEC FINE FLECK INTERIOR DECORATING SPRAY FINISH -- 8010-00F026253
=====================  Product Identification  =====================

Product ID:MULTISPEC FINE FLECK INTERIOR DECORATING SPRAY FINISH
MSDS Date:11/26/1991
FSC:8010
NIIN:00F026253
=== Responsible Party ===
Company Name:MULTICOLOR SPECIALTIES INC
Address:2101 SOUTH 54TH AVENUE
City:CICERO
State:IL
ZIP:60650
Country:US
Info Phone Num:708-656-5586
Emergency Phone Num:708-656-5586/800-424-9300
CAGE:GO184
=== Contractor Identification ===
Company Name:MULTICOLOR SPECIALTIES INC
Address:2101 SOUTH 54TH AVENUE
City:CICERO
State:IL
ZIP:60650
Country:US
Phone:708-656-5586
CAGE:GO184

=============  Composition/Information on Ingredients  =============

Ingred Name:STODDARD SOLVENT (PETROLEUM DISTILLATE), MINERAL SPIRITS
CAS:8052-41-3
RTECS #:WJ8925000
Fraction by Wt: 19-21%
Other REC Limits:525 MG/CUM
OSHA PEL:500 PPM
ACGIH TLV:100 PPM

Ingred Name:KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,
    HYDROTREATED ,(MINERAL SPIRITS)
CAS:64742-47-8
RTECS #:OA5504000
Fraction by Wt: 7-9%

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: 45-47%

Ingred Name:VINYLTOLUENE-2-ETHYLHEXYL ACRYLATE COPOLYMER   *93-3*
CAS:60381-61-5
Fraction by Wt: 9-10%

Ingred Name:ALUMINUM SILICATE ANHYDROUS *93-4*
CAS:22708-90-3
Fraction by Wt: 5-6%

Ingred Name:TITANIUM DIOXIDE, TIO2
CAS:13463-67-7
RTECS #:XR2275000
Fraction by Wt: 5-6%
OSHA PEL:15 MG/CUM
ACGIH TLV:10 MG/CUM (DUST)

Ingred Name:VOL ORGANIC CMPD: 4.43-4.50 LBS/GAL
RTECS #:9999999VO

Ingred Name:WEIGHT PER GALLON IN POUNDS: 8.34
RTECS #:9999999WG

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:INHALATION: SPRAY MISTS MAY CAUSE
    SEVERE LUNG IRRITATION, LUNG DAMAGE, CENTRAL NERVOUS SYSTEM
    DEPRESSION, UNCONSCIOUSNESS OR DEATH. ASPIRATION HAZARD.
Explanation of Carcinogenicity:NONE
Medical Cond Aggravated by Exposure:SENSITIVITY TO SOLVENTS

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. INGESTION: DON'T INDUCE
    VOMITING. SKIN: FLUSH W/WATER. INHALATION: REMOVE TO FRESH AIR. IF
    NOT BREATHING, GIVE OXYGEN OR CPR. OBTAIN MEDICAL ATTENTION IN ALL
    CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:115F
Lower Limits:0.7%
Upper Limits:7%
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER FOG
Fire Fighting Procedures:WEAR SCBA & PROTECTIVE CLOTHING.
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE IGNITION SOURCES. SMALL SPILL: PICK UP
    W/ABSORBENT MATERIAL. LARGE SPILL: SCOOP UP W/NON-SPARKING TOOLS.
    VENTILATE AREA. PLACE IN CLOSED CONTAINERS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE AWAY FROM HEAT, SPARKS, OPEN
    FLAME. AVOID SKIN CONTACT. DON'T BREATH MIST. STORE IN COOL, DRY,
    WELL VENTILATED AREA.
Other Precautions:AVOID SPONTANEOUS COMBUSTION OF CONTAMINATED RAGS &
    ORGANIC MATTER. EMPTY CONTAINERS MAY RETAIN HAZARDOUS PROPERTIES &
    BE DANGEROUS. DON'T PRESSURIZE, CUT, WELD, BRAZE, SOLDER, DRILL,
    GRIND CONTAINERS . SLIPPERY ON SURFACES, CLEAN UP.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:WEAR NIOSH/OSH APPROVED RESPIRATOR IF LEVELS
    EXCEEDED.
Ventilation:SUFFICIENT TO KEEP LEVELS BELOW LIMITS.
Protective Gloves:CHEMICAL RESISTANT PLASTIC OR RUBBER
Eye Protection:CHEMICAL GOGGLES/SPLASH GUARDS
Other Protective Equipment:EYE WASH & SHOWER. PROTECTIVE CREAMS.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
HIGH CONCENTRATIONS OF VAPORS WHICH MAY ACCUMULATE IN POORLY VENTILATED
    AREAS CAN CAUSE UNCONSCIOUSNESS OR DEATH, AND INCREASE THE RISK OF
    FIRE. REMOVE CONTAMINATED CLOTHING.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:212-405F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN BU AC
Solubility in Water: 56%
Appearance and Odor:COLORED LIQUID FLECKS, SLIGHT SOLVENT ODOR
Percent Volatiles by Volume:84

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS, STRONG ALKALIES, SELECTED
    AMINES.
Stability Condition to Avoid:HEAT, SPARKS, FLAME, ELECTRICAL EQUIPMENT,
    APPLIANCES, PILOT LIGHTS, OTHER IGNITION SOURCES.
Hazardous Decomposition Products:CO, CO2

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/FEDERAL, STATE &
    LOCAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.