TRI-CHEM CORP -- PERMA FIL (PART A), 121A  -- 8030-00N042214
<pre>=====================  Product Identification  =====================

Product ID:PERMA FIL (PART A), 121A
MSDS Date:06/08/1990
FSC:8030
NIIN:00N042214
Kit Part:Y
=== Responsible Party ===
Company Name:TRI-CHEM CORP
Box:448
City:SOUTHFIELD
State:MI
ZIP:48037-0448
Country:US
Info Phone Num:800-456-6255
Emergency Phone Num:800-456-6255
Preparer's Name:BARRY MORRISON
CAGE:0UE66
=== Contractor Identification ===
Company Name:TRI-CHEM CORP
Box:City:SOUTHFIELD
State:MI
ZIP:48037-0448
Country:US
Phone:800-456-6255
CAGE:0UE66

=============  Composition/Information on Ingredients  =============

Ingred Name:PROPANE, 2,2-BIS(P-(2,3-EPOXYPROPOXY)PHENYL)-; (DIGLYCIDYL
    ETHER OR BISPHENOL-A)
CAS:1675-54-3
RTECS #:TX3800000
Fraction by Wt: > 1%

Ingred Name:ACRYLIC ACID, HEXAMETHYLENE ESTER; (MULTIFUNCTIONAL
    ACRYLATE MONOMER)
CAS:13048-33-4
RTECS #:AT1430000
Fraction by Wt: > 1%

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYE: MAY CAUSE INJURY WHICH MAY
    PERSIST FOR SEVERAL DAYS. SKIN: REDDENING AND SWELLING OF SKIN,
    SENSITIZER. MAY CAUSE ALLERGIC REACTION IN CERTAIN INDIVIDUALS.
    INHAL: HEADACHE.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:ALLERGIC REACTION TO CERTAIN
    SENSITIVE INDIVIDUALS.

=======================  First Aid Measures  =======================

First Aid:EYE:FLUSH W/COPIOUS AMTS OF H2O FOR @ LST 15 MIN LIFTING LIDS
    & REMOVING CNTCT LENSES TO ENSURE COMPLETE IRRIGATION. GET MED
    ATTN. SKIN:FLUSH W/WATER & THEN WASH W/SOAP & WATER. LAUNDER CONTAM
    CLTHG B EFORE REUSE. GET MED ATTN IF IRRIT PERSISTS. INHAL:REMOVE
    TO FRESH AIR & ASSIST BRTHG AS NEC. GET MED ATTN. INGEST: IF
    APPRECIABLE QTYS HAVE BEEN SWALLOWED, GET MED ATTENTION.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:WATER, CARBON DIOXIDE, FOAM, DRY CHEMICAL.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . USE WATER SPRAY TO KEEP CONTAINERS COOL.
Unusual Fire/Explosion Hazard:HIGH TEMPERATURES AND FIRE CONDITIONS MAY
    CAUSE RAPID AND UNCONTROLLED POLYMERIZATION WHICH CAN RESULT IN
    EXPLOSIONS AND THE VIOLENT RUPTURE OF CONTAINERS.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. VENTILATE
    AREA. DIKE AREA TO CONTAIN SPILL. USE ABSORBENT MATERIAL TO SOAK UP
    SPILL. SHOVEL OR SWEEP INTO CONTAINER FOR DISPOSAL. WASH SPILL AREA
    WITH DETERGENT SOLU TION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:AVOID CONTACT. AVOID INHALATION OF
    VAPORS. DO NOT TAKE INTERNALLY. AVOID STORAGE NEAR EXCESSIVE HEAT
    OR IGNITION SOURCES.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT NORMALLY REQUIRED. NIOSH/MSHA APPROVED
    RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST/MECHANICAL GENERAL: NORMAL VENTILATION
    ADEQUATE.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APRV CHEMICAL WORKERS GOGGLES (FP N
Other Protective Equipment:EYEWASH AND SAFETY SHOWER MEETING ANSI
    DESIGN CRITERIA .
Work Hygienic Practices:WEAR PROTECTIVE CLOTHING AND WASH THOROUGHLY
    AFTER USING.
Supplemental Safety and Health
KEY1;T6.

==================  Physical/Chemical Properties  ==================

HCC:C2
Boiling Pt:B.P. Text:200F,93C
Vapor Pres:0.05
Vapor Density:HVR/AIR
Spec Gravity:1.13 (H2O=1)
Evaporation Rate &amp; Reference:SLOWER (BUTYL ACETATE=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR LIGHT COLORED LIQUID WITH MILD ODOR.
Percent Volatiles by Volume:0

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES, AMINES, AND MERCAPTANS.
Stability Condition to Avoid:EXCESSIVE HEAT.
Hazardous Decomposition Products:OXIDES OF CARBON.

====================  Disposal Considerations  ====================

Waste Disposal Methods:IN ACCORDANCE WITH ALL LOCAL, STATE AND FEDERAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.