CANON USA INC -- EP CARTRIDGE, R34-0002 -- 6850-01-240-2346
===================== Product Identification ===================== Product ID:EP CARTRIDGE, R34-0002 MSDS Date:10/01/1988 FSC:6850 NIIN:01-240-2346 === Responsible Party === Company Name:CANON USA INC Address:ONE CANON PLAZA City:LAKE SUCCESS State:NY ZIP:11042 Country:US Info Phone Num:516-488-6700 Emergency Phone Num:516-488-6700 CAGE:1BA63 === Contractor Identification === Company Name:CANON USA INC Address:ONE CANON PLZ Box:City:NEW HYDE PARK State:NY ZIP:11042 Country:US Phone:516-328-5000; 5600 CAGE:08YZ7 Company Name:CANON USA INC Address:ONE CANON PLAZA Box:City:LAKE SUCCESS State:NY ZIP:11042 Country:US Phone:516-328-5600 CAGE:1BA63 ============= Composition/Information on Ingredients ============= Ingred Name:STYRENE ACRYLATE COPOLYMER Fraction by Wt: 55-65% Ingred Name:IRON OXIDE, PEL/TLV AS IRON OXIDE FUME, CAS # 1309-37-1. CAS:1317-61-9 Fraction by Wt: 30-40% OSHA PEL:10 MG/M3 ACGIH TLV:5 MG/M3 ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:MINIMAL RESPIRATORY TRACT IRRITATION MAY OCCUR W/EXPOSURE TO LARGE AMOUNTS OF ANY NON-TOXIC DUST. THERE ARE NO KNOWN HEALTH HAZARDS, MUTAGENICITY, CARCINOGENICITY OR TERATOGENICITY. Explanation of Carcinogenicity:NOT RELEVANT Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER. Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER. ======================= First Aid Measures ======================= First Aid:INHAL:REMOVE FROM EXPOSURE TO FRESH AIR. EYE:OPEN EYE AND FLUSH WITH PLENTY OF WATER FOR AT LEAST 15 MIN. SKIN:WASH WITH SOAP AND WATER. INGEST:DRINK SEVERAL GLASSES OF WATER. CALL A PHYSICIAN. ===================== Fire Fighting Measures ===================== Extinguishing Media:WATER, DRY CHEMICAL, CARBON DIOXIDE. Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL PROTECTIVE EQUIPMENT Unusual Fire/Explosion Hazard:THIS MATERIAL IS CAPABLE OF CREATING A DUST EXPLOSION. REFER TO NFPA PAMPHLET NO. 654, "STANDARD FOR THE PREVENTION OF FIRES AND DUST EXPLOSIONS (SEE SUPP DATA) ================== Accidental Release Measures ================== Spill Release Procedures:SWEEP MATERIAL ONTO PAPER AND PLACE IN FIBER CARTON. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:KEEP OUT OF THE REACH OF CHILDREN. KEEP FROM CONTACT WITH OXIDIZING MATERIALS. Other Precautions:NONE SPECIFIED BY MANUFACTURER. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN . Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT. Protective Gloves:NONE SPECIFIED BY MANUFACTURER. Eye Protection:CHEMICAL WORKERS GOGGLES . Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER. Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER. Supplemental Safety and Health EXPLO HAZ:IN THE CHEMICAL, DYE, PHARMACEUTICAL AND PLASTICS INDUSTRIES", IF THIS IS TO BE REDUCED OR COLLECTED AS A POWDER. ================== Physical/Chemical Properties ================== HCC:N1 Melt/Freeze Pt:M.P/F.P Text:212F,100C Vapor Pres:NEGLIGIBLE Spec Gravity:1.4-1.6 Evaporation Rate & Reference:NEGLIGIBLE Solubility in Water:NEGLIGIBLE Appearance and Odor:FINE POWDER, SLIGHT PLASTIC ODOR. Percent Volatiles by Volume:NEGLIG ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES STRONG OXIDIZERS. Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER. Hazardous Decomposition Products:AS WITH ANY OTHER ORGANIC MATERIAL, COMBUSTION WILL PRODUCE CARBON DIOXIDE AND CARBON MONOXIDE. ==================== Disposal Considerations ==================== Waste Disposal Methods:NO SPECIAL DISPOSAL TECHNIQUE REQUIRED. ENSURE COMPLIANCE WITH FEDERAL, STATE AND/OR LOCAL REGULATIONS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.