PENNZOIL CO -- PENZOIL MILTI-PURPOSE GEAR LUBRICANT 4096  -- 9150-00F015287
<pre>=====================  Product Identification  =====================

Product ID:PENZOIL MILTI-PURPOSE GEAR LUBRICANT 4096
MSDS Date:01/22/1993
FSC:9150
NIIN:00F015287
=== Responsible Party ===
Company Name:PENNZOIL CO
Address:700 MILIAM
Box:2967
City:HOUSTON
State:TX
ZIP:77252-2967
Country:US
Info Phone Num:713-546-4000
Emergency Phone Num:713-546-4000/713-236-6070
CAGE:01326
=== Contractor Identification ===
Company Name:PENNZOIL CO
Address:700 MILIAM PENNZOIL PL
Box:2967
City:HOUSTON
State:TX
ZIP:77252-2967
Country:US
Phone:800-546-6227
CAGE:01326

=============  Composition/Information on Ingredients  =============

Ingred Name:POUR POINT DEPRESSANT
Fraction by Wt: <5%

Ingred Name:FRICTION MODIFIERS
Fraction by Wt: <5%

Ingred Name:ANTIFOAM AGENTS (TYPE UNIDENTIFIED)
Fraction by Wt: <0.01%

Ingred Name:DETERGENT/INHIBITOR SYSTEM
Fraction by Wt: <5%

Ingred Name:BASE LUBRICATING OIL MIXTURE
Fraction by Wt: 85-95%

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: PRACTICALLY NON-IRRITATING.
    SKIN: SLIGHT IRRITATION. PROLONGED/REPEATED CONTACT MAY RESULT IN
    DERMATITIS. INGESTION: RELATIVELY NON-TOXIC. PROLONGED/REPEATED
    EXPOSURE TO OIL MIST POSES A RISK OF  PULMONARY DISEASE SUCH AS
    CHRONIC LUNGINFLAMMATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:DRYNESS, CHAPPING, REDDENING, IRRITATION, OIL
    ACNE, BLACKHEADS, SECONDARY INFECTION, LAXATIVE PROPERTIES,
    ABDOMINAL CRAMPS, DIARRHEA, SHORTNESS OF BREATH, COUGH.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER & CONTINUE FLUSHING. IF
    MATERIAL IS HOT, TREAT FOR THERMAL BURNS. SKIN: WASH AREA
    THOROUGHLY W/SOAP & WATER. IF MATERIAL IS HOT, SUBMERGE AREA IN
    COLD WATER. INGES TION: DON'T INDUCE VOMITING. OBTAIN MEDICAL
    ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:COC
Flash Point:>388F
Extinguishing Media:DRY CHEMICAL, FOAM/CO2
Fire Fighting Procedures:WATER MAY BE INEFFECTIVE BUT CAN BE USED TO
    COOL CONTAINERS. CAUTION SHOULD BE EXERCISED WHEN USING WATER/FOAM,
    FROTHING MAY OCCUR.
Unusual Fire/Explosion Hazard:DENSE SMOKE MAY BE GENERATED WHILE
    BURNING. AUTOIGNITION TEMP = >800F.

==================  Accidental Release Measures  ==================

Spill Release Procedures:CONTAIN IMMEDIATELY. DON'T ALLOW TO ENTER
    SEWERS/WATERCOURSES. REMOVE ALL SOURCES OF IGNITION. ABSORB
    W/APPROPRIATE INERT MATERIAL. LARGE: PICK UP USING VACUUM PUMPS,
    SHOVELS, BUCKETS/OTHER MEANS & PL ACE IN DRUMS/OTHER SUITABLE
    CONTAINERS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DON'T TRANSFER TO UNMARKED CONTAINERS.
    STORE IN CLOSED CONTAINERS AWAY FROM HEAT, SPARKS, OPEN
    FLAME/OXIDIZING MATERIALS.
Other Precautions:AVOID SKIN CONTACT & AEROSOLIZATION/MISTING OF
    PRODUCT.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NOT REQUIRED UNDER NORMAL USE. IF VAPOR/MIST IS
    GENERATED WHEN MATERIAL IS HEATED/HANDLED, USE AN ORGANIC VAPOR
    RESPIRATOR W/A DUST & MIST FILTER. ALL RESPIRATORS MUST BE NIOSH
    CERTIFIED. DON'T USE CO MPRESSED OXYGEN IN HYDROCARBON AREA.
Ventilation:IF VAPOR/MIST IS GENERATED WHEN THE MATERIAL IS
    HEATED/HANDLED USE ADEQUATE VENTILATION W/GOOD ENGINEERING.
Protective Gloves:IMPERVIOUS
Eye Protection:PLASTIC FACE SHIELD
Other Protective Equipment:SPLASH-PROOF SAFETY GOGGLES, IMPERVIOUS
    BOOTS & APRONS, INSULATED PROTECTIVE CLOTHING IF HANDLING HOT
    MATERIAL.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE. PROPERLY DISPOSE OF LEATHER ARTICLES, WHICH CAN'T BE
    DECONTAMINATED.
Supplemental Safety and Health
CONSUMPTION OF FOOD & BEVERAGE SHOULD BE AVOIDED IN WORK AREAS WHERE
    HYDROCARBONS ARE PRESENT. ALWAYS WASH HANDS & FACE W/SOAP & WATER
    BEFORE EATING, DRINKING/SMOKING. PRODUCT IS SOLUBLE IN HYDROCARBO
    NS. FIRE EXTINGUISHERS SHOULD BE KEPT READILY AVAILABLE.

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>800F
Melt/Freeze Pt:M.P/F.P Text:-10F
Spec Gravity:0.8995
Appearance and Odor:CLEAR, DARK RED W/TYPICAL GEAR OIL.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CO, CO2 & OTHER OXIDES

====================  Disposal Considerations  ====================

Waste Disposal Methods:IF REGULATED SOLVENTS ARE USED TO CLEAN UP
    SPILLED MATERIAL THE WASTE MUST BE REGULATED. DISPOSE OF IAW/LOCAL,
    STATE & FEDERAL REGULATIONS. LANDFILL/INCINERATE IN AN APPROVED
    FACILITY. MATERIALS SHOUL D BE RECYCLED IF POSSIBLE.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.