SUMNER LABORATORIES, INC -- SUMNER LABS 210 PLASTIC CLEANER AND POLISH  -- 6830-00F034683
<pre>=====================  Product Identification  =====================

Product ID:SUMNER LABS 210 PLASTIC CLEANER AND POLISH
MSDS Date:01/01/1989
FSC:6830
NIIN:00F034683
=== Responsible Party ===
Company Name:SUMNER LABORATORIES, INC
Address:210 LINCOLN STREET
City:BOSTON
State:MA
ZIP:02111
Country:US
Info Phone Num:617-542-8656
Emergency Phone Num:617-542-8656
Preparer's Name:R. MCCOLLUM
CAGE:3J317
=== Contractor Identification ===
Company Name:SUMNER LABORATORIES, INC
Address:210 LINCOLN STREET
Box:City:BOSTON
State:MA
ZIP:02111
Country:US
Phone:617-542-8656
CAGE:3J317

=============  Composition/Information on Ingredients  =============

Ingred Name:BLEND OF MINERAL SPIRITS, NAPTHA VM & P
CAS:8030-30-6
RTECS #:DE3030000
Fraction by Wt: 25-35%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:200 PPM
ACGIH TLV:200 PPM

Ingred Name:N-BUTANE
CAS:106-97-8
RTECS #:EJ4200000
Fraction by Wt: 7-9%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:800 PPM
ACGIH TLV:800 PPM; 9394

Ingred Name:PROPANE (DIMETHYLMETHANE)
CAS:74-98-6
RTECS #:TX2275000
Fraction by Wt: 1-2%
Other REC Limits:NONE RECOMMENDED
OSHA PEL:1000 PPM
ACGIH TLV:ASPHYXIANT; 9394

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NOT KNWON
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:THERE ARE NO CURRENTLY KNOWN ACUTE OR
    CHRONIC HEALTH HAZARDS FROM THE PROPER USE OF THIS PRODUCT.
    EXCESSIVE VAPOR CONCENTRATIONS OF PROPANE (10,000 PPM OR 1% BY
    VOLUME) MAY AFFECT CENTRAL NERVOUS SYST EM.
Effects of Overexposure:DIZZINESS, IRRITATION OF RESPIRATAORY TRACT,
    DRYING OR FLAKING OF SKIN OR RASH.
Medical Cond Aggravated by Exposure:NONE KNOWN.

=======================  First Aid Measures  =======================

First Aid:EYE:WASH W/LARGE AMOUNTS OF TEMPERED WATER. IF IRRITATION
    DEVELOPS OR PERSIST CONSULT PHYSICIAN. SKIN:WASH OFF WITH MILD SOAP
    & WATER. IF IRRITATION DEVELOPS OR PERSIST CONSULT PHYSICIAN.
    INGEST:DO NO T INDUCE VOMITING. SEEK IMMED MED ATTN.INHAL:REMOVE TO
    FRESH AIR. IF BREATHING HAS CEASED GIVE ARTIFI RESPIRATION. SEEK
    IMMED MED ATTN. USE OXYGEN AS NECESSARY.

=====================  Fire Fighting Measures  =====================

Flash Point Method:OC
Flash Point:-157F,-105C
Lower Limits:1.8
Upper Limits:9.5
Extinguishing Media:CARBON DIOXIDE, WATE FOG, CHEMICAL FOAM.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS. COOL
    UNINVOLVED CANS PREVENT POSSBILE BURSTING.
Unusual Fire/Explosion Hazard:FLOORS WILL BE SLIPPERY WHERE MATERIALS
    HAVE BEEN RELEASED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:SMALL SPILLS: MOP OR WIPE UP. REMOVE TO OUT OF
    DOORS. LARGE SPILLS:VENTILATE AREA. CONTAIN LIQUID AND TRANSFER TO
    STEEL DRUMS. CLOSE TIGHTLY.
Neutralizing Agent:NOT STATED.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN A COOL, DRY AREA, AWAY FROM
    DIRECT SUNLIGHT.
Other Precautions:READ LABEL PRECAUTIONS THOROUGHLY BEFORE USE. USE
    ONLY AS DIRECTED. AVOID CONTACT WITH ON SKIN, FACE, OR EYES. KEEP
    FROM REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NONE SPECIFIED.
Ventilation:USE ONLY IN WELL VENTILATED AREA.MECHANICAL:FOR LG SPILLS
    OR WHERE VENTIL IS INADEQUATE TO KEEP VAPOR CONCEN BELOW TLV.
Protective Gloves:WHERE REPEAT/PROLONG CONTACT IS EXPECTED
Eye Protection:SAFETY GLASSES.
Work Hygienic Practices:WASH HANDS AFTER HANDLING PRODUCT.
Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

HCC:V3
Boiling Pt:B.P. Text:-44F,-42C
Vapor Pres:<65PSIG
Vapor Density:>1
Spec Gravity:<1
Evaporation Rate &amp; Reference:SLOWER THAN BUAC
Solubility in Water:EMULSIFIABLE
Appearance and Odor:MILK WHITE TO SLIGHTLY YELLOW AEROSOL
    SPRYA/PERFUMED.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATERIALS, ACIDS, BASES AND SELECTED AMINES.
Stability Condition to Avoid:EXCESSIVE HEAT (GLOWING SURFACES, FLAME)
    THAT MAY TEND TO THERNALLY DETERIORATE MATERIALS.
Hazardous Decomposition Products:THERMAL DECOMPOSITION:CARBON
    MONOXIDE/CARBON DIOXIDE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
    FEDERAL REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.