UNION CARBIDE CHEMICALS AND PLASTICS CO INC -- ARGON -- 6685-00-473-2419
=====================  Product Identification  =====================

Product ID:ARGON
MSDS Date:12/01/1986
FSC:6685
NIIN:00-473-2419
=== Responsible Party ===
Company Name:UNION CARBIDE CHEMICALS AND PLASTICS CO INC
Address:39 OLD RIDGEBURY RD
City:DANBURY
State:CT
ZIP:06817-0001
Country:US
Info Phone Num:203-794-6753
Emergency Phone Num:203-794-6753
CAGE:0TAZ2
=== Contractor Identification ===
Company Name:MOELLER INSTRUMENT CO
Address:126 MAIN ST
Box:668
City:IVORYTON
State:CT
ZIP:06442
Country:US
Phone:860-767-2104
CAGE:76526
Company Name:UNION CARBIDE CORPORATION
Address:39 OLD RIDGEBURY RD
Box:City:DANBURY
State:CT
ZIP:06817-0001
Country:US
Phone:1-800-568-4000 / 732-563-5522
CAGE:0TAZ2

=============  Composition/Information on Ingredients  =============

Ingred Name:ARGON
CAS:7440-37-1
Fraction by Wt: 100%
Other REC Limits:NONE DETERMINED

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:PRODUCT'S LD50 (ORAL RAT) WAS NOT STATED
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:SWALLOWING:PRODUCT IS GAS AT NORMAL
    TEMPERATURE. SKIN:NO EVIDENCE OF ADVERSE EFFECTS AVAILABLE.
    INHALATION:ASPHYXIANT. MODERATE CONCENTRATIONS MAY CAUSE HEADACHE,
    DROWSINESS, DIZZINESS, EXCITATION, EX CESS SALVATION, VOMITING,
    UNCONSCIOUSNESS. EYE:NO HARMFUL EFFECT EXPECTED FROM VAPOR.
    CHRONIC-NO ADVERSE EFFECT EXPECTED
Explanation of Carcinogenicity:MANUFACTURER GAVE NO INFORMATION ABOUT
    CARCINOGENICITY. HMIS DOES NOT EXPECT IT TO BE CARCINOGENIC.
Effects of Overexposure:ASPHYXIANT. MODERATE CONCENTRATIONS MAY CAUSE
    HEADACH, DROWSINESS, DIZZINESS, EXCITATION, EXCESS SALIVATION,
    VOMITING, UNCONSCIOUSNESS. LACK OF OXYGEN CAN CAUSE DEATH. WELDING
    & CUTTING FUMES & GASES  CAN BE DANGEROUS TO YOUR HEALTH & MAY
    CAUSE SERIOUS LUNG DISEASE.
Medical Cond Aggravated by Exposure:OVEREXPOSURE IS UNLIKELY TO
    AGGRAVATE EXISTING MEDICAL CONDITIONS.

=======================  First Aid Measures  =======================

First Aid:SWALLOWING:PRODUCT IS GAS AT NORMAL TEMPERATURE & PRESSURE.
    SKIN:FLUSH W/WATER. INHALATION:REMOVE TO FRESH AIR. GIVE ARTIFICAIL
    RESPIRATION IF NOT BREATHING. GIVE OXYGEN IF BREATHING IS
    DIFFICULT. CAL L A PHYSICIAN. EYE:FLUSH W/WATER.

=====================  Fire Fighting Measures  =====================

Extinguishing Media:ARGON CANNOT CATCH FIRE. USE MEDIA APPROPIATE FOR
    SURROUNDING FIRE.
Fire Fighting Procedures:EVACUATE ALL PERSONNEL FROM DANGER AREA. COOL
    CYLINDER WITH WATER SPRAY FROM MAX DISTANCE, THEN MOVE CONTAINERS
    AWAY FROM FIRE AREA IF W/O RISK. SHUT OFF LEAK.
Unusual Fire/Explosion Hazard:ARGON CANNOT CATCH FIRE. CONTAINER MAY
    RUPTURE DUE TO HEAT OF FIRE. DO NOT SUBJECT CONTAINER TO
    TEMPERATURE > 125F/52C. MOST CONTAINERS HAVE PRESSURE RELIEF.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE PERSONNEL FROM DANGER AREA. USE SELF
    CONTAINED BREATHING APPARATUS. SHUT OFF CYLINDER IF W/O RISK. VENT
    AREA OF LEAK OR MOVE CYLINDER TO WELL VENTILATED AREA. TEST AREA
    FOR SUFFICIENT OXYGEN  CONTENT PRIOR TO PERMITTING RE-ENTRY.
Neutralizing Agent:MFR GAVE NO INFORMATION ON MSDS.

======================	Handling and Storage  ======================

Handling and Storage Precautions:PREVENT FIRES. STORE/USE WITH ADEQUATE
    VENTILATION. THE DEFECT PRODUCED BY AN ARC BURN COULD LEAD TO
    CYLINDER RUPTURE. DO NOT GROUND CYLINDER.
Other Precautions:SEE NFPA 51B & ANSI Z49.1

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE RESPIRABLE FUME RESPIRATOR OR AIR SUPPLIED
    RESPIRATOR WHEN WORKING IN CONFINED SPACE OR WHERE LOCAL EXHAUST OR
    VENTILATION DOES NOT KEEP EXPOSURE BELOW TLV. SELECT PER
    OSHA29CFR1910.134.
Ventilation:USE ENOUGH VENTILATION, LOCAL EXHAUST OR BOTH, TO KEEP
    FUMES& GASES BELOW TLV'S IN THE WORKERS BREATHING ZONE & AREA.
Protective Gloves:WELDING GLOVES RECOMMENDED
Eye Protection:WEAR HELMET W/FILTER LENS
Other Protective Equipment:AS NEEDED, WEAR HAND, HEAD, & BODY
    PROTECTION WHICH HELP TO PREVENT INJURY FROM RADIATION, SPARKS, &
    ELECTRICAL SHOCK.
Work Hygienic Practices:MFR:?  HMIS:USE GOOD INDUSTRIAL HYGIENE
    PRACTICES. MINIMIZE CONTACT & WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
NONE

==================  Physical/Chemical Properties  ==================

HCC:G3
NRC/State Lic Num:NONE
Boiling Pt:B.P. Text:-301F,-185C
Melt/Freeze Pt:M.P/F.P Text:-308F,-189C
Vapor Pres:GAS
Vapor Density:1.378
Spec Gravity:GAS
Solubility in Water:NEGLIBLE
Appearance and Odor:COLORLESS, ODORLESS GAS AT NORMAL TEMPERATURE AND
    PRESSURE.
Percent Volatiles by Volume:100

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
NONE CURRENTLY KNOWN. ARGON IS CHEMICALLY INERT.
Stability Condition to Avoid:HIGH PRESSURE GAS. CLOSE VALVE WHEN NOT IN
    USE &/OR EMPTY. USE W/EQUIP RATED TO WITHSTAND PRESSURE. DO NOT
    GROUND CYL.
Hazardous Decomposition Products:HAZARDOUS COMPOUNDS COME FROM THE
    PROCESS NOT ARGON. OZONE & NITROGEN OXIDES MAY BE FORMED BY THE
    RADIATION FROM ARC.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:SLOWLY RELEASE INTO ATMOSPHERE. DISCARD ANY
    PRODUCRESIDUE, DISPOSABLE CONTAINER OR LINER IN AN ENVIRONMENTALLY
    ACCEPTABLE MANNER IN FULL COMPLIANCE WITH FEDERAL, STATE AND LOCAL
    REGULATIONS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.