KENTUCKY-TENNESSEE CLAY -- TENNESSEE #1 SGP -- 6810-00F004134
===================== Product Identification ===================== Product ID:TENNESSEE #1 SGP MSDS Date:01/01/1987 FSC:6810 NIIN:00F004134 === Responsible Party === Company Name:KENTUCKY-TENNESSEE CLAY/MAYFIELD, KY 42066 Emergency Phone Num:(502) 247-3061 CAGE:KENTU === Contractor Identification === Company Name:KENTUCKY-TENNESSEE/MAYFIELD, KY 42066 Box:449 CAGE:KENTU ============= Composition/Information on Ingredients ============= Ingred Name:HYDROUS ALUMINUM SILICATE RTECS #:GL1670500 Ingred Name:SILICA, CRYSTALLINE - QUARTZ CAS:14808-60-7 RTECS #:VV7330000 Fraction by Wt: 5-30% OSHA PEL:SEE TABLE Z3 ACGIH TLV:0.1 MG/M3 RDUST;9293 ===================== Hazards Identification ===================== Effects of Overexposure:LONG-TERM EXPOSURE TO DUST/FREE SILICA IN CONC. HIGHER THAN RECOMMENDED TLV MAY CAUSE SILICOSIS ======================= First Aid Measures ======================= First Aid:EYES: FLUSH THOROUGHLY WITH WATER. SEE A PHYSICIAN IF IRRITATION PERSISTS. ===================== Fire Fighting Measures ===================== Unusual Fire/Explosion Hazard:NON-FLAMMABLE ================== Accidental Release Measures ================== Spill Release Procedures:CLEAN UP AND COLLECT, MINIMIZING EXCESSIVE DUST. ====================== Handling and Storage ====================== Handling and Storage Precautions:MINIMIZE DUST GENERATION AND EXPOSURE. DON'T BREATH DUST. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:IF SPRAYING COATINGS USE NIOSH-APPROVED DUST/MIST RESPIRATORS. Ventilation:LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV. Eye Protection:GOGGLES Other Protective Equipment:NOT REQUIRED Supplemental Safety and Health MSDS DATE: 20 MAY 1986. ================== Physical/Chemical Properties ================== Boiling Pt:B.P. Text:1560-1785C Spec Gravity:2.65 Solubility in Water:NEGLIGIBLE Appearance and Odor:EARTHY ODOR WHEN WET, RAW COLOR, LIGHT GRAY. Percent Volatiles by Volume:NONE ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES NONE Stability Condition to Avoid:FREE QUARTZ CHANGES STRUCTURE TO TRIDYMITE >870C. Conditions to Avoid Polymerization:FREE QUARTZ CHANGES STRUCTURE TO CRISTOBALITE >1470C. ==================== Disposal Considerations ==================== Waste Disposal Methods:ANY APPROVED SOLID WASTE DISPOSAL INCLUDING BURIAL. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.