BENJAMIN MOORE & CO. -- MOORWOOD EXTERIOR SOLID WOOD STAIN, 080 -- 8010-00N009067
=====================  Product Identification  =====================

Product ID:MOORWOOD EXTERIOR SOLID WOOD STAIN, 080
MSDS Date:03/01/1986
FSC:8010
NIIN:00N009067
=== Responsible Party ===
Company Name:BENJAMIN MOORE & CO.
Address:51 CHESTNUT RIDGE RD.
City:MONTVALE
State:NJ
ZIP:07645
Info Phone Num:201-344-1200
Emergency Phone Num:201-344-1200
CAGE:09585
=== Contractor Identification ===
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:09585
Company Name:BENJAMIN MOORE & CO
Address:51 CHESTNUT RIDGE RD
Box:City:MONTVALE
State:NJ
ZIP:07645
Country:US
Phone:201-573-9600
CAGE:91950

=============  Composition/Information on Ingredients  =============

Ingred Name:MINERAL SPIRITS.VAPOR PRESSURE:<5.0 MMHG AT 100F,38C.
CAS:64742-86-5
RTECS #:LX3296500
Fraction by Wt: 30-37%
Other REC Limits:N/K 
OSHA PEL:500 PPM TWA (MFR)
ACGIH TLV:100 PPM TWA (MFR)

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:N/K 
Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:REPORTS HAVE ASSOCIATED PERMANENT
    BRAIN AND NERVOUS SYSTEM DAMAGE WITH REPEATED PROLONGED
    OVEREXPOSURE TO SOLVENTS AMONG PERSONS ENGAGED IN THE PAINTING
    TRADE.
Explanation of Carcinogenicity:N/K 
Effects of Overexposure:EYES:PRIMARY IRRITATION.SKIN:PRIMARY
    IRRITATION.INGESTION:N/K .INHALATION:RESPIRATORY IRRITATION AND
    CENTRAL NERVOUS SYSTEM EFFECT-ANESTHETIC.

=======================  First Aid Measures  =======================

First Aid:EYES:FLUSH WITH WATER FOR AT LEAST 15 MINUTES.SKIN:WASH WITH
    MILD SOAP AND WATER.INGESTION:N/K .INHALATION:REMOVE FROM
    AREA,MAINTAIN BREATHING,CALL PHYSICIAN.

=====================  Fire Fighting Measures  =====================

Flash Point:113F,45C
Lower Limits:1.0%
Upper Limits:N/K 
Extinguishing Media:FOAM,CO*2,DRY CHEMICAL,WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT .DO NOT USE WATER STREAM ON BURNING
    LIQUID.COOL EXPOSED CONTAINERS WITH WATER.
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION PRODUCTS:BURNING
    MAY PRODUCE CARBON DIOXIDE AND CARBON MONOXIDE.

==================  Accidental Release Measures  ==================

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.AVOID BREATHING
    VAPORS.USE NON-SPARKING TOOLS TO RETURN MATERIALS TO
    CONTAINER.ABSORB RESIDUE WITH FULLER'S EARTH.
Neutralizing Agent:N/K 

======================	Handling and Storage  ======================

Handling and Storage Precautions:COMBUSTIBLE-KEEP AWAY FROM HEAT AND
    FLAME.USE ADEQUATE VENTILATION.CLOSE CONTAINER AFTER EACH USE.KEEP
    OUT OF REACH OF CHILDREN.
Other Precautions:AVOID SKIN CONTACT AND BREATHING OF VAPOR OR SPRAY
    MIST.DO NOT TAKE INTERNALLY.DELIBERATELY CONCENTRATION AND
    INHALATION OF CONTENTS MAY BE HARMFUL OR FATAL.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
    EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENT NECESSARY TO KEEP AIR CONC BELOW TLV
    .DISCHARGE EXHAUST AWAY FROM IGNITION SOURCES.
Protective Gloves:REQUIRED DURING REPEATED CONTACT.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:CLOTHING ADEQUATE TO PROTECT SKIN.
Supplemental Safety and Health
BOILING RANGE:313-388F,156-197C.SPECIFIC GRAVITY:1.2-1.3 (WATER=1).

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:(SEE SUPP)
Melt/Freeze Pt:M.P/F.P Text:N/K 
Decomp Temp:Decomp Text:N/K 
Vapor Pres:N/K 
Vapor Density:>AIR
Spec Gravity:(SEE SUPP DATA)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:N/K 
Appearance and Odor:LIQUID
Percent Volatiles by Volume:51-56

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON DIOXIDE AND
    CARBON MONOXIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
    FEDERAL,STATE AND LOCAL REGULATIONS .DO NOT INCINERATE SEALED
    CONTAINERS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.