DYNAMATION INC -- CARBON MONOXIDE (5-200 PPM IN AIR)  -- 6830-00N033709
<pre>=====================  Product Identification  =====================

Product ID:CARBON MONOXIDE (5-200 PPM IN AIR)
MSDS Date:10/01/1990
FSC:6830
NIIN:00N033709
=== Responsible Party ===
Company Name:DYNAMATION INC
Address:3784 PLAZA DR
City:ANN ARBOR
State:MI
ZIP:48108
Country:US
Info Phone Num:313-769-0573
Emergency Phone Num:313-769-0573
CAGE:58746
=== Contractor Identification ===
Company Name:DYNAMATION INC
Address:3784 PLAZA DR
Box:City:ANN ARBOR
State:MI
ZIP:48108-7354
Country:US
Phone:313-769-0537
CAGE:58746

=============  Composition/Information on Ingredients  =============

Ingred Name:CARBON MONOXIDE
CAS:630-08-0
RTECS #:FG3500000
Fraction by Wt: 5-50%
OSHA PEL:50 PPM
ACGIH TLV:25 PPM; 9293

Ingred Name:AIR
Fraction by Wt: BALANCE

=====================  Hazards Identification  =====================

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES  Skin:NO  Ingestion:NO
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:CARBON MONOXIDE ACTS AS AN ASPHYXIANT.
    LOW LEVELS IN AIR MAY IMPAIR THE REACTION TIME OR SENSORY
    PERCEPTION. BECAUSE OF THE AFFINITY FOR HEMOGLOBIN, EVEN SMALL
    AMOUNTS CAN POSE A SERIOUS HAZARD. CHRON IC: CARDIOVASCULAR
    PROBLEMS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE

=======================  First Aid Measures  =======================

First Aid:INHAL: IMMED REMOVE VICTIM TO FRESH AIR. IF BREATHING HAS
    STOPPED, GIVE ARTF RESP. IF BREATHING IS DIFFICULT, GIVE O*2. SEEK
    MEDICAL ATTENTION PROMPTLY. SKIN: FLUSH WITH COPIOUS AMOUNTS OF
    WATER. CALL  MD . EYES: IMMED FLUSH WITH POTABLE WATER FOR A
    MINIMUM OF 15 MIN. SEEK ASSISTANCE FROM MD .INGEST: GET MD
    IMMEDIATELY .

=====================  Fire Fighting Measures  =====================

Flash Point:NONFLAMMABLE
Extinguishing Media:USE WHAT IS APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
    PROTECTIVE EQUIPMENT . USE WATER SPRAY TO KEEP FIRE EXPOSED
    CYLINDERS COOL.
Unusual Fire/Explosion Hazard:DO NOT EXPOSE TO HEAT OR FLAMES.

==================  Accidental Release Measures  ==================

Spill Release Procedures:EVACUATE AND VENTILATE AREA. REMOVE LEAKING
    CYLINDER TO EXHAUST HOOD OR SAFE OUTDOORS AREA. ELIMINATE SOURCES
    OF IGNITION.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN WELL VENTILATED AREAS ONLY.
    KEEP VALVE PROT CAP ON CYLINDERS WHEN NOT IN USE AND SECURE
    CYLINDER WHEN USING TO PROTECT FROM FALLING.
Other Precautions:PROTECT CONTAINERS FROM PHYSICAL DAMAGE. DO NOT
    DEFACE CYLINDERS OR LABELS. IF METHYLENE CHLORIDE AND CO EXPOSURES
    OCCUR FOR THE SAME WORKERS, THE LEVELS OF BOTH MUST BE CONTROLLED
    BELOW TLV LEVELS.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:USE NIOSH/MSHA APPROVED SCBA IN CASE OF
    EMERGENCY OR NON-ROUTINE USE.
Ventilation:PROVIDE ADEQUATE GENERAL AND LOCAL EXHAUST VENTILATION.
    VENTILATION SHOULD BE EXPLOSION-PROOF.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES 
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

==================  Physical/Chemical Properties  ==================

Vapor Density:1
Solubility in Water:0.0187 @ 20C
Appearance and Odor:COLORLESS, ODORLESS GAS.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CO REACTS WITH BRF*3, CS*2O, CIF*3, IF*7, NF*3, O*2, OF*2, AG*2O,
    OXIDIZING MATERIALS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE.

====================  Disposal Considerations  ====================

Waste Disposal Methods:ENSURE COMPLIANCE WITH APPLICABLE LOCAL, STATE
    AND FEDERAL REGULATIONS. RETURN DEFECTIVE CYLINDER TO SUPPLIER.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.