BENJAMIN MOORE & CO -- MOORECRAFT LATEX SEMI-GLOSS ENAMEL, 276 -- 8010-00N017393
===================== Product Identification ===================== Product ID:MOORECRAFT LATEX SEMI-GLOSS ENAMEL, 276 MSDS Date:11/02/1993 FSC:8010 NIIN:00N017393 === Responsible Party === Company Name:BENJAMIN MOORE & CO Address:51 CHESTNUT RIDGE RD City:MONTVALE State:NJ ZIP:07645 Country:US Info Phone Num:201-573-9600 Emergency Phone Num:800-424-9300(CHEMTREC) CAGE:09585 === Contractor Identification === Company Name:BENJAMIN MOORE & CO Address:51 CHESTNUT RIDGE RD City:MONTVALE State:NJ ZIP:07645 Country:US Phone:201-573-9600 CAGE:09585 Company Name:BENJAMIN MOORE & CO Address:51 CHESTNUT RIDGE RD Box:City:MONTVALE State:NJ ZIP:07645 Country:US Phone:201-573-9600 CAGE:91950 ============= Composition/Information on Ingredients ============= Ingred Name:CLAY, KAOLIN; (HYDROUS ALUM SILICATES (F*) CAS:1332-58-7 RTECS #:GF1670500 Fraction by Wt: 6.8% OSHA PEL:15 MG/M3 TDUST ACGIH TLV:2 MG/M3 TDUST; 9495 Ingred Name:TITANIUM OXIDE; (TITANIUM DIOXIDE) CAS:13463-67-7 RTECS #:XR2275000 Fraction by Wt: 18.9% OSHA PEL:15 MG/M3 TDUST ACGIH TLV:10 MG/M3 TDUST; 9495 ===================== Hazards Identification ===================== LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER. Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO Health Hazards Acute and Chronic:ACUTE: INHALATION: IRRITATION OF THE RESPIRATORY TRACT. SKIN AND EYES: PRIMARY IRRITATION. INGESTION: INGESTION OF LARGE AMOUNTS COULD CAUSE SERIOUS INJURY. CHRONIC: NONE SPECIFIED BY MANUFACTURER. Explanation of Carcinogenicity:NOT RELEVANT. Effects of Overexposure:SEE HEALTH HAZARDS. Medical Cond Aggravated by Exposure:NONE EXPECTED WHEN USED IN ACCORDANCE WITH SAFE HANDLING AND USE INFORMATION. ======================= First Aid Measures ======================= First Aid:INHALATION: REMOVE TO FRESH AIR. GET MEDICAL HELP FOR ANY BREATHING DIFFICULTY. EYE: FLUSH THOROUGHLY WITH WATER FOR AT LEAST 15 MINUTES. CALL PHYSICIAN. SKIN: WASH WITH SOAP AND WATER. INGESTION: DRI NK 1 OR 2 GLASSES OF WATER TO DILUTE. DO NOT INDUCE VOMITING. CAL PHYSICIAN. ===================== Fire Fighting Measures ===================== Flash Point Method:PMCC Flash Point:>250F,>121C Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG. Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE EQUIPMENT . COOL EXPOSED CONTAINERS WITH WATER. Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY BURST IF EXPOSED TO EXTREME HEAT OR FIRE. TOXIC GASES MAY FORM WHEN PRODUCT BURNS. ================== Accidental Release Measures ================== Spill Release Procedures:FLUSH WITH WATER. ABSORB WITH SAWDUST OR RAGS. Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER. ====================== Handling and Storage ====================== Handling and Storage Precautions:DO NOT THROW OR DROP CONTAINERS. Other Precautions:AVOID CONTACT WITH EYES AND PROLONGED CONTACT WITH SKIN OR BREATHING OF SPRAY MIST OR SANDING DUST. CLOSE CONTAINER AFTER EACH USE. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY. ============= Exposure Controls/Personal Protection ============= Respiratory Protection:USE NIOSH APPROVED RESPIRATOR SPECIFIED FOR PROTECTION AGAINST PAINT SPRAY MIST AND SANDING DUST IN RESTRICTED OR CONFINED AREAS. Ventilation:ADEQUATE TO MAINTAIN WORKING ATMOSPHERE BELOW TLV & LEL (SEE INGREDIENT DATA AND CONCENTRATIONS). MECHANICAL (SUPDAT) Protective Gloves:IMPERVIOUS GLOVES . Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS . Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET ANSI DESIGN CRITERIA . CLOTHING ADEQUATE TO PROTECT SKIN. Work Hygienic Practices:REMOVE AND WASH CLOTHING BEFORE REUSE. WASH HANDS BEFORE EATING, SMOKING OR USING THE WASHROOM. Supplemental Safety and Health % VOLAT: 66.7-69.2. VENT: EXHAUST MAY BE REQUIRED IN CONFINED AREAS. ================== Physical/Chemical Properties ================== Vapor Density:HVR/AIR Spec Gravity:1.09-1.24(F PN) Evaporation Rate & Reference:SLOWER THAN ETHER Appearance and Odor:NONE SPECIFIED BY MANUFACTURER. Percent Volatiles by Volume:SUPDAT ================= Stability and Reactivity Data ================= Stability Indicator/Materials to Avoid:YES NONE REASONABLY FORSEEABLE. Stability Condition to Avoid:ELEVATED TEMPERATURES. Hazardous Decomposition Products:BURNING MAY PRODUCE CARBON DIOXIDE AND CARBON MONOXIDE. ==================== Disposal Considerations ==================== Waste Disposal Methods:CONVENTIONAL PROCEDURES IN COMPLIANCE WITH LOCAL, STATE AND FEDERAL REGULATIONS. DO NOT INCINERATE SEALED CONTAINERS. Disclaimer (provided with this information by the compiling agencies): This information is formulated for use by elements of the Department of Defense. The United States of America in no manner whatsoever, expressly or implied, warrants this information to be accurate and disclaims all liability for its use. Any person utilizing this document should seek competent professional advice to verify and assume responsibility for the suitability of this information to their particular situation.