RECTORSEAL CORPORATION -- UNIFLUX -- 3439-00F045727
=====================  Product Identification  =====================

Product ID:UNIFLUX
MSDS Date:04/20/1994
FSC:3439
NIIN:00F045727
=== Responsible Party ===
Company Name:RECTORSEAL CORPORATION
Address:2830 PRODUCE ROW
City:HOUSTON
State:TX
ZIP:77023-5822
Country:US
Info Phone Num:713-928-6423
Emergency Phone Num:713-928-6423
CAGE:2P988
=== Contractor Identification ===
Company Name:RECTORSEAL CORPORATION
Address:2830 PRODUCE ROW
City:HOUSTON
State:TX
ZIP:77023-5822
Phone:(713) 928-6428
CAGE:2P988
Company Name:THE RECTORSEAL CORPORATION
Address:2601 SPENWICK
Box:City:HOUSTON
State:TX
ZIP:77055
Country:US
Phone:800-231-3345
CAGE:60150

=============  Composition/Information on Ingredients  =============

Ingred Name:PETROLATUM, GREASE	   *95-4*
CAS:8009-03-8

Ingred Name:ZINC CHLORIDE
CAS:7646-85-7
RTECS #:ZH1400000
Fraction by Wt: <40%
OSHA PEL:1 MG/CUM
ACGIH TLV:1 MG/CUM
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:GAS OIL, BLEND	*95-4*
CAS:64741-44-2
RTECS #:LX3296000
ACGIH TLV:5 MG/CUM

=====================  Hazards Identification  =====================

Routes of Entry: Inhalation:YES  Skin:YES  Ingestion:YES
Reports of Carcinogenicity:NTP:NO    IARC:NO	OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION/CHEMICAL BURNS WHICH
    MAY RESULT IN BLINDNESS. SKIN: DERMATITIS, IRRITATION/CHEMICAL
    BURNS. INHALATION: IRRITATION/CHEMICAL BURNS TO RESPIRATORY SYSTEM
    & MUCOUS MEMBRANES. MAY BE FATAL . INGESTION: CHEMICAL BURNS TO
    DIGESTIVE SYSTEM & MUCOUS MEMBRANE. MAY BE FATAL. (SEE SUPP)
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, BURNING SENSATION, BURNS.
Medical Cond Aggravated by Exposure:PRE-EXISTING SKIN & LUNG DISORDERS.

=======================  First Aid Measures  =======================

First Aid:EYES: FLUSH W/WATER FOR 15 MINS. INHALATION: REMOVE TO FRESH
    AIR. GIVE CPR/OXYGEN IF NEEDED. INGESTION: DON'T INDUCE VOMITING.
    IF CONSCIOUS, GIVE LARGE AMOUNTS OF WATER. SKIN: WASH W/SOAP &
    WATER. OBT AIN MEDICAL ATTENTION IN ALL CASES.

=====================  Fire Fighting Measures  =====================

Flash Point Method:SCC
Flash Point:260F
Lower Limits:0.9
Upper Limits:7
Extinguishing Media:FOAM, DRY CHEMICAL, CO2/WATER FOG.
Fire Fighting Procedures:WEAR FULL FACE PIECE SCBA & OTHER PROTECTIVE
    CLOTHING.
Unusual Fire/Explosion Hazard:HEAT MAY LIQUIFY PRODUCT, BUILD UP
    PRESSURE & RUPTURE CLOSED CONTAINERS. ACIDIC LIQUID/FUMES MAY BE
    CREATED.

==================  Accidental Release Measures  ==================

Spill Release Procedures:WIPE UP TO PREVENT FOOTING HAZARD. AVOID
    FLUSHING INTO SEWERS, DRAINS, WATERWAYS & SOIL. WEAR PROTECTIVE
    CLOTHING DURING CLEANUP.

======================	Handling and Storage  ======================

Handling and Storage Precautions:STORE IN COOL PLACE. KEEP CONTAINER
    CLOSED WHEN NOT IN USE.
Other Precautions:AVOID CONTACT W/SKIN/CLOTHING. EMPTY CONTAINERS MAY
    CONTAIN PRODUCT RESIDUES & VAPORS. TREAT AS IF FULL & OBSERVE ALL
    PRODUCT PRECAUTIONS. DON'T REUSE EMPTY CONTAINERS. KEEP OUT OF
    REACH OF CHILDREN.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:CONFINED, POORLY VENTILATED AREAS: WEAR
    NIOSH/MSHA APPROVED AIR PURIFYING/SUPPLIED AIR RESPIRATORS DURING
    SOLDERING OPERATIONS UNTIL FUMES HAVE DISSIPATED.
Ventilation:LOCAL EXHAUST: MAINTAIN AIR FLOW AWAY FROM USER TO EXHAUST
    FUMES & VAPORS. MECHANICAL (GENERAL): ACCEPTABLE.
Protective Gloves:NON-PERMEABLE CHEMICAL
Eye Protection:SAFETY GLASSES/GOGGLES
Other Protective Equipment:NORMAL PROTECTION EQUIPMENT USED IN
    SOLDERING OPERATIONS SO AS TO PREVENT ANY CONTACT.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
    REUSE. WASH THOROUGHLY BEFORE EATING, DRINKING, SMOKING/LEAVING
    WORK AREA.
Supplemental Safety and Health
HEALTH HAZARDS CONT'D: SHORT TERM TOXIC EFFECTS TO LIVER & KIDNEYS CAN
    OCCUR. EYES:

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:>212F
Melt/Freeze Pt:M.P/F.P Text:125F
Vapor Pres:<0.01
Vapor Density:>1
Spec Gravity:1.18
Evaporation Rate & Reference:(ETHYL ACETATE =1): <0.01
Solubility in Water:SLIGHT
Appearance and Odor:OLIVE PASTE W/MILD ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
CYANAMIDS, SULFIDES, WATER & STRONG OXIDIZERS.
Stability Condition to Avoid:HEAT
Hazardous Decomposition Products:CHLORIDES, ZINC OXIDE, HYDROGEN
    CHLORIDE FUMES, CO, CO2 & FRAGMENTED HYDROCARBONS.

====================  Disposal Considerations  ====================

Waste Disposal Methods:RCRA CLASSIFIED HAZARDOUS WASTE. DISPOSE OF IN
    APPROVED CONTROLLED INCINERATION FACILITY IAW/FEDERAL, STATE &
    LOCAL REGULATIONS. UN 1840.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.