M22 Urethane Alkyd Gloss Enamel
Manufacturer Information
Name
Benjamin Moore & Co.
Address
101 Paragon Drive
Montvale, NJ 07645
Phone
866-708-9180
Effective Date
Pictogram
--
NFPA
HMIS
Health |
|
Flammability |
|
Physical Hazard |
|
Personal Protection |
|
Signal Word
Warning
Hazard Statements
- COMBUSTIBLE LIQUID AND VAPOR! HARMFUL IF INHALED. CAUSES EYE AND SKIN IRRITATION
Precautionary Statements
- Keep away from heat and flame. Use only with adequate ventilation. Do not breathe vapors, spray mist or sanding dust. Do not get in eyes or on skin. WEAR A PROPERLY FITTED VAPOR/PARTICULATE RESPIRATOR APPROVED BY NIOSH FOR USE WITH PAINTS, eye protection, gloves, and protective clothing during application (or sanding) and until all vapors and spray mist are exhausted. In confined places or in situations where continuous spray operations are typical, or if proper respirator fit is not possible, wear a positive-pressure, supplied air respirator approved by NIOSH. In all cases, follow respirator manufacturer’s directions. Do not permit anyone without protection in the painting area. Close container after each use.
Mt. Hood Community College Local data
- SKU #
*This local data is shared by all revisions